Parameterization - Siemens SINAMICS GM150 Operating And Installation Instructions

Old faults
This menu displays the number and titles of the old faults. The top row shows the following
information.
● The total number of faults.
● The time when the fault occurred.
1. Press the <Tools+> key. Select "older" or "newer" to fetch the fault messages arranged
2. Press the <Help> function key to fetch information about correcting the fault.
Old alarms
This menu displays the number and titles of the old alarms. The top row shows the following
information:
● The total number of alarms.
● The time when the alarm occurred.
1. Press the <Tools+> key. Select "older" or "newer" to fetch the alarms arranged
2. Press the <Help> function key to fetch information about correcting the alarm.
8.2.3.2

Parameterization

Parameterization menu structure
The menus that you can call from the "Parameterization" menu using the function keys are
described below.
Figure 8-6
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017
The faults are displayed in ascending order in separate screens.
chronologically.
The alarms are displayed in ascending order in separate screens.
chronologically.
Parameterization menu structure
8.2 Operation via the AOP30 operator panel
Operation
143