Replacing The Operator Panel - Siemens SINAMICS GM150 Operating And Installation Instructions

Maintenance
9.7 Repairs
9.7.4

Replacing the operator panel

To replace the operator panel, proceed as follows:
1. Switch off the main circuit-breaker.
2. Open the cabinet.
3. Disconnect the power supply
4. Press the retaining lugs
5. Snap on a new operator panel.
6. Attach the connectors for the power supply and communications cable.
218
①
Power supply
②
Communication cable
③
Retaining lug
Figure 9-13 Replacing the operator panel
①
and communication cable
③
and withdraw the operator panel to the front.
②
at the operator panel.
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017