Commissioning / Service Device Commissioning - Siemens SINAMICS GM150 Operating And Installation Instructions

Operation
8.2 Operation via the AOP30 operator panel
Displaying alarms
Alarms are displayed by the yellow "ALARM" LED. Additionally, an appropriate note relating
to the cause is displayed on the operator panel. Up to eight alarms occurring at the same time
are displayed.
Figure 8-9
8.2.3.4

Commissioning / service device commissioning

Commissioning / service / device commissioning menu structure
Figure 8-10
1. Press the <<MENU>> key.
2. Press the <▼> function key to select the "Commissioning/Service" row. Press the <OK>
3. Press the <▼> function key to select the "Device commissioning" row. Press the <OK>
148
Alarm screen
Commissioning / service / device commissioning menu structure
function key to confirm the selection.
function key to confirm the selection.
– The menus marked with "*" appear only when the "special access" access level was
selected
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017