Mrc Control, Fan Convection, Electric; Mrc Control, True Convection, Electric - Whirlpool AER5522VAS0 Manual

MRC Convection, Electric (continued)

MRC Control, Fan Convection, Electric

MRC Control, True Convection, Electric

Press "OVEN LIGHT" for 5 seconds.
Press TEMP/TIME "+" or "-".
Press "OVEN LIGHT" for 5 seconds.
Press TEMP/TIME "+" or "-".
Press START.
Press START.
Action
1. Press CANCEL/CANCEL/START
Action
2. Press the TEMP/TIME "+" key
Press "+" again
1. Press CANCEL/CANCEL/START
"+" again
2. Press the TEMP/TIME "+" key
"+" again
Press "+" again
"+" again
"+" again
"+" again
"+" again
"+" again
"+" again
"+" again
"+" again
"+" again
When in the Diagnostic mode, instructions will be provided by the control to help you through
each of the programs. Press Cancel to exit the test at any time.
"+" again
The "AUTO TEST" program will automatically test all the oven circuits. This test is very easy to use
When in the Diagnostic mode, instructions will be provided by the control to help you through
and when the test is complete, test results will be provided. Whenever servicing the oven, this is
each of the programs. Press Cancel to exit the test at any time.
the test to run.
The "AUTO TEST" program will automatically test all the oven circuits. This test is very easy to use
*Press "DELAY START" to clear all fault codes
and when the test is complete, test results will be provided. Whenever servicing the oven, this is
When checking for fault codes and "NO FAULTS" is displayed, do not change the control.
the test to run.
When checking for fault codes and "NO FAULTS" is displayed, do not change the control.
Temperature Adjustment
Previous Offset shown, or U-00 is displayed.
Temperature Adjustment
Adjusts temperature in 5⁰F (3⁰C) increments
Previous Offset shown, or U-00 is displayed.
between -30⁰F (-18⁰C) and +30⁰F (+18⁰C).
Bake and Broil Temperatures are offset Adjusts temperature in 5⁰F (3⁰C) increments
automatically to the same degree. between -30⁰F (-18⁰C) and +30⁰F (+18⁰C).
Bake and Broil Temperatures are offset
If START is not pressed within 1 minute, adjustment
automatically to the same degree.
is ignored.
If START is not pressed within 1 minute, adjustment
is ignored.
Diagnostic Mode
Diagnostic Mode
"TEST ON" ##⁰F "UO"
"USAGE"
"ENG MODE"
"TEST ON" ##⁰F "UO"
"TEST MODE"
"USAGE"
"VERSION"
"ENG MODE"
"DISPLAY"
"TEST MODE"
"CONTROL RESET"
"VERSION"
"FAULTS"
"DISPLAY"
"AUTO TEST"
"CONTROL RESET"
the OVEN, automatically)
"FAULTS"
"AUTO TEST"
the OVEN, automatically)
*Press "Delay Start" to clear all fault codes.
*Press "Delay Start" to clear all fault codes.
2- 3
Models:
MER8772WB0
MER8772WB1
MER8772WS0
MER8772WS1
MER8772WW0
MER8772WW1
YMER8772WB0
YMER8772WB1
YMER8772WS0
Models:
MER8875WB0
MER8875WB1
MER8875WS0
MER8875WS1
MER8875WW0
MER8875WW1
Display
(In the test mode)
Display
(Displays hours of Operation)
(Manufacturing Information)
(In the test mode)
(Manual Check of Control relays)
(Displays hours of Operation)
(Manufacturing Information)
(Manufacturing Information)
(Checks all LEDs in Display)
(Manual Check of Control relays)
(Resets Control settings)
(Manufacturing Information)
*(Displays all Fault Codes)
(Checks all LEDs in Display)
(Performs a complete check of
(Resets Control settings)
*(Displays all Fault Codes)
(Performs a complete check of
YMER8772WS1
YMER8772WW0
YMER8772WW1
YMERH770WB0
YMERH770WB1
YMERH770WS0
YMERH770WS1
YMERH770WW0
YMERH770WW1
YMER8875WB0
YMER8875WB1
YMER8875WS0
YMER8875WS1
YMER8875WW0
YMER8875WW1