Whirlpool AER5522VAS0 Manual page 24

LCC190 Control, Self-Clean, Gas
LCC95 Control, Self-Clean, Gas
1. Press BAKE for 5 seconds.
2. Press TEMP/TIME "+" or "-".
1. Press BAKE for 5 seconds.
2. Press TEMP/TIME "+" or "-".
3. Press START.
3. Press START.
Action
1. Press CANCEL/CANCEL/START
Action
2. Press the TEMP/TIME "+" key
1. Press CANCEL/CANCEL/START
Press "+" again
2. Press the TEMP/TIME "+" key
"+" again
Press "+" again
"+" again
"+" again
"+" again
"+" again will display 1 of the 3
"+" again will display 1 of the 3
"+" again
"+" again
"+" again
*Press "START" or "DELAY START" to clear all fault codes
"+" again
When checking for fault codes, if the display shows "CLr", Do Not replace the control.
When checking for fault codes, if the display shows "CLr", Do Not replace the control.
LCC Self-Clean, Gas (continued)
Temperature Adjustment
Previous Offset shown, or U-00 is displayed.
Temperature Adjustment
Adjusts temperature in 10⁰ F (5⁰ C) increments
Previous Offset shown, or U-00 is displayed.
between -30⁰F and +30⁰F.
Adjusts temperature in 10⁰ F (5⁰ C) increments
Bake and Broil Temperatures are offset
between -30⁰F and +30⁰F.
automatically to the same degree.
Bake and Broil Temperatures are offset
If START is not pressed within 1 minute, adjustment
automatically to the same degree.
is ignored.
If START is not pressed within 1 minute, adjustment
is ignored.
Diagnostic Mode
Diagnostic Mode
"tSt"
###⁰F or ⁰C
"tSt"
-30⁰F to +30⁰F
###⁰F or ⁰C
###
-30⁰F to +30⁰F
###
###
"CLr"
###
F#
"CLr"
## (Hours of operation at error code)
F#
####
(Hours of operation at error code)
"00" (Door Open) or "01" (Door Closed)
####
*Press "START" to clear all fault codes
"00" (Door Open) or "01" (Door Closed)
*Press "START" to clear all fault codes
MGR7662WB0
MGR7662WB1
MGR7662WQ0
MGR7662WQ1
MGR7662WS0
MGR7662WS1
MGR7662WW0
AGR5844VDB0
AGR5844VDB1
AGR5844VDB2
AGR5844VDD0
AGR5844VDD1
AGR5844VDD2
Display
(You are in the test mode)
Display
(Oven Sensor Temperature)
(You are in the test mode)
(Oven Offset Temperature)
(Oven Sensor Temperature)
(Control Software Version)
(Oven Offset Temperature)
(Control Memory Checksum)
(Control Software Version)
(Control Memory Checksum)
*(Error Code - See Tech Sheet for Repair) ##
(Hours of operation at error code)
*(Error Code - See Tech Sheet for Repair) ##
(Total hours of oven operation)
(Total hours of oven operation)
1- 15
Models:
MGR7662WW1
MGR7665WB0
MGR7665WB1
MGR7665WS0
MGR7665WS1
MGR7665WW0
MGR7665WW1
Models:
AGR5844VDS0
AGR5844VDS1
AGR5844VDS2
AGR5844VDW0
AGR5844VDW1
AGR5844VDW2
(Good Control)
(Good Control)