Whirlpool AER5522VAS0 Manual page 55

MRC II Control, Double Oven, True Convection (Lower)
MRC II Control, Double Oven, True Convection (Lower)
Released
MRC II Double Oven, Electric (continued)
Warming Zone, Electric
Warming Zone, Electric
Temperature Adjustment
Press "OPTIONS" until "Temp Calib"
Temperature Adjustment
is displayed.
Press "OPTIONS" until "Temp Calib"
Press #3 or #6 keypads.
is displayed.
Press #3 or #6 keypads.
Press START.
Press START.
Action
Press CANCEL/CANCEL/START OFF / Off / START
Action
Press the the number "3" key, follow
directions at each operation.
Press CANCEL/CANCEL/START
Press "3" again
Press the the number "3" key, follow
"3" again
directions at each operation.
"3" again
Press "3" again
"3" again
"3" again
"3" again
"3" again
"3" again
"3" again
"3" again
"3" again
"3" again
When in the Diagnostic mode, instructions will be provided by the control to help you through
"3" again
each of the programs. Press Cancel to exit the test at any time.
When in the Diagnostic mode, instructions will be provided by the control to help you through
When checking for Fault Codes and "NO FAULTS" is displayed. Do Not replace the Control.
each of the programs. Press Cancel to exit the test at any time.
The "AUTO TEST" program will automatically test all the oven circuits. This test is very easy to
use and when the test is complete, test results will be provided. Whenever servicing the oven,
When checking for Fault Codes and "NO FAULTS" is displayed. Do Not replace the Control.
this is the test to run.
The "AUTO TEST" program will automatically test all the oven circuits. This test is very easy to
*Press "DELAY START" to clear all fault codes.
*Press "START TIME" to clear all fault codes.
use and when the test is complete, test results will be provided. Whenever servicing the oven,
this is the test to run.
*Press "START TIME" to clear all fault codes.
Previous Offset shown.
Adjusts temperature in 5⁰F (3⁰C) increments
Previous Offset shown.
between -30⁰F (-18⁰C) and +30⁰F (+18⁰C).
Bake and Broil Temperatures are offset
Adjusts temperature in 5⁰F (3⁰C) increments
automatically to the same degree.
between -30⁰F (-18⁰C) and +30⁰F (+18⁰C).
Bake and Broil Temperatures are offset
If START is not pressed within 1 minute,
automatically to the same degree.
adjustment is ignored.
If START is not pressed within 1 minute,
adjustment is ignored.
Diagnostic Mode
Display
Diagnostic Mode
"TEST ON" ##⁰F "UO"
Display
"CONTROL RESET"
"TEST ON" ##⁰F "UO"
"USAGE" (Displays hours of Operation)
"CONTROL RESET"
"ENG MODE" (Manufacturing Information)
"TEST MODE" (Manual Check of Control relays)
"USAGE" (Displays hours of Operation)
"VERSION" (Manufacturing Information)
"ENG MODE" (Manufacturing Information)
"DISPLAY"
"TEST MODE" (Manual Check of Control relays)
"FAULTS"
"VERSION" (Manufacturing Information)
"AUTO TEST" (Performs a complete check of
"DISPLAY"
the OVEN, automatically)
"FAULTS"
"AUTO TEST" (Performs a complete check of
the OVEN, automatically)
3- 5
Models:
KERS505XBL00
KERS505XSS00
KERS505XWH00
Models:
KERS507XSS00
YKER507XSS00
(In the test mode)
(Resets Control settings)
(In the test mode)
(Resets Control settings)
(Checks all LEDs in Display)
*(Displays all Fault Codes)
(Checks all LEDs in Display)
*(Displays all Fault Codes)