Removing The Mrc Control Board; Removing The User Interface And Display Assembly - Whirlpool IKEA IEL730C Technical Education

. Remove 2 screw from each of the cooktop mounting
brackets (2).
. From behind the range, remove 1 screw from each of
the cooktop mounting brackets (underside 2).
. Lift the cooktop from the back and remove
Figure 7
Figure 5
Figure 6

Removing the MRC Control Board

1. Remove the control panel
(see Removing the Control Panel section).
2. Remove the cooktop (see "Removing the
Cooktop section).
. Locate the MRC board in the center of the console.
4. Remove all wire harness connectors from the board.
Locate the control board mounting bracket
mounting screws (2) and remove.
. Lift up and pull the MRC board assembly out.
Figure 8
Removing the User Interface and
Display Assembly
1. Remove the control panel (see "Removing
the Control Panel section).
2. Turn the control panel over to expose
the display assembly.
. Remove the electrical connections to
the display assembly and user interface.
4. Remove the 4 mounting screws securing the display
assembly.
. Remove the mounting screws securing the user
interface.
6. Remove the user interface.
Vesta Gas and Electric Slide-In Range
COMPONENT ACCESS
Figure 9
n
3-3