Table of Contents
Advertisement
Introduction
The implement described in this manual has been
designed with care and built by skilled workers using
quality materials and processes. Proper assembly,
maintenance and safe operation will allow this machine
to provide you with satisfactory use for seasons to come.
Read this entire manual before attempting to
assemble, adjust or operate this machine.
Failure to comply with this warning can result in
personal injury or death, damage
or its components and inferior operation.
IMPORTANT
Standard Turfmaker Seeders have difficulty metering
varieties of fine or hard fescues. For mixtures with
fine or hard fescues you must order the Turfmaker II
High Capacity Seeders.
Description of Unit
The Brillion Standard Landscape Seeder has been
designed for seeding grasses and lawn mixtures. It is
ideal for sod and turf producers, or anyone who wishes to
seed large areas at precise rates. Micro-meter
adjustment permits precise metering with an infinite
range of settings.
Using this Manual
This manual will familiarize you with safety, assembly,
operation, adjustment, and maintenance. Read this
manual and follow the recommendations to help ensure
safe and efficient operation.
• The information in this manual is current at time of
printing. Some parts may change to assure top
performance.
• Location reference: Right and Left designations in this
manual are determined by facing the direction the
machine will travel during field operation, unless
otherwise stated.
DANGER
to the machine
Safety Information
Owner Assistance
If customer service or repairs are needed, contact your
Brillion dealer. They have trained personnel, parts and
service equipment specially designed for Brillion
products. Your machine's parts should only be replaced
with Brillion parts. Have the Serial Number and complete
Model Number available when ordering parts from your
Brillion dealer. See Figure 1-1. The ID Plate is located on
the right front of the machine.
Warranty Registration
Brillion Farm Equipment, by Landoll, shall have no
warranty obligation unless each product is registered,
within 10 days of retail purchase, using the Landoll
Corporation Ag Products on-line registration process.
Please refer to the Ag Products Policy and Procedures
Manual, accessible at
www.landoll.com
instructions regarding product registration.
Enter your product information below for quick reference.
MODEL NUMBER
SERIAL NUMBER
DATE OF PURCHASE
Figure 1-1: ID Plate
Chapter 1
for step by step
1-1
Hide quick links:
Advertisement
Table of Contents
