Table of Contents
Advertisement
torque speed curves & tables
115UMD300 Unimotor
40
UNI2401
35
30
25
Intermittent Torque
20
15
10
Continuous Torque
5
0
0
1000
2000
115UME300 Unimotor
UNI2401
45
40
35
30
Intermittent Torque
35
20
15
10
Continuous Torque
5
0
0
1000
142UMA300 Unimotor
UNI1404
UNI1405
20
15
Intermittent Torque
10
5
Continuous Torque
0
0
1000
44
UNI2402
380 V
480 V
4000
3000
Speed (rpm)
UNI2402
380 V
480 V
4000
2000
3000
Speed (rpm)
p
380 V
480 V
4000
2000
3000
Speed (rpm)
142UMB300 Unimotor
UNI2401
35
30
25
Intermittent Torque
20
15
10
Continuous Torque
5
0
0
1000
5000
142UMC300 Unimotor
50
UNI2402
45
40
35
Intermittent Torque
30
25
20
15
10
Continuous Torque
5
0
5000
0
1000
142UMD300 Unimotor
70
UNI2403
65
60
55
50
45
Intermittent Torque
40
35
30
UNI2403
25
20
15
Continuous Torque
10
5
0
5000
0
1000
UNI2402
480 V
380 V
4000
2000
3000
Speed (rpm)
UNI2403
380 V
480 V
4000
2000
3000
Speed (rpm)
UNI3401
380 V
480 V
UNI3401
4000
2000
3000
Speed (rpm)
5000
5000
5000
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Unidrive Servo Series and is the answer not in the manual?
Questions and answers
Need to input parameters into a UNI2402 Unidrive for a Rover 346
Need to input parameters into a UNI2402 Unidrive for a Rover 346 To clarify, it is a Biesse Rover 346... a c&c Machine Thanks
The parameters for a Control Techniques UNI2402 Unidrive Servo can be input using the on-board keypad, a remote keypad, or through UniSoft, a Windows-based configuration software tool. The drive has logically organized menus where parameters can be set.
To input parameters:
1. Use the keypad to navigate through the menus.
2. Select the required function from the logically organized menus.
3. Adjust the parameter values as needed.
4. Save the changes to apply the new settings.
For a Rover 346, specific motor and operational parameters should be set according to the motor’s requirements, such as speed limits, acceleration/deceleration times, braking mode, and PID control settings. If using UniSoft, connect the drive to a PC and configure it through the software interface.
This answer is automatically generated