Table of Contents
Advertisement
torque speed curves & tables
95UMC300 Unimotor
20
UNI1404
15
Intermittent Torque
10
5
Continuous Torque
0
0
1000
2000
95UMD300 Unimotor
25
UNI 1404
20
15
Intermittent Torque
10
5
Continuous Torque
0
0
1000
2000
95UME300 Unimotor
30
UNI 1404
25
20
Intermittent Torque
15
10
5
Continuous Torque
0
0
2000
1000
p
UNI1405
480 V
380 V
3000
4000
5000
Speed (rpm)
UNI 1405
480 V
380 V
3000
4000
5000
Speed (rpm)
UNI 1405
480 V
380 V
3000
4000
5000
Speed (rpm)
115UMA300 Unimotor
15
UNI 1404
UNI 1403
10
Intermittent Torque
5
Continuous Torque
0
0
2000
1000
Speed (rpm)
115UMB300 Unimotor
25
UNI 1405
UNI 1404
20
15
Intermittent Torque
10
5
Continuous Torque
0
0
2000
1000
Speed (rpm)
115UMC300 Unimotor
UNI 2401
UNI 1405
30
25
20
Intermittent Torque
15
10
5
Continuous Torque
0
0
2000
1000
Speed (rpm)
480 V
380 V
3000
4000
5000
380 V
480 V
3000
4000
5000
380 V
480 V
3000
4000
5000
43
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Unidrive Servo Series and is the answer not in the manual?
Questions and answers
Need to input parameters into a UNI2402 Unidrive for a Rover 346
Need to input parameters into a UNI2402 Unidrive for a Rover 346 To clarify, it is a Biesse Rover 346... a c&c Machine Thanks
The parameters for a Control Techniques UNI2402 Unidrive Servo can be input using the on-board keypad, a remote keypad, or through UniSoft, a Windows-based configuration software tool. The drive has logically organized menus where parameters can be set.
To input parameters:
1. Use the keypad to navigate through the menus.
2. Select the required function from the logically organized menus.
3. Adjust the parameter values as needed.
4. Save the changes to apply the new settings.
For a Rover 346, specific motor and operational parameters should be set according to the motor’s requirements, such as speed limits, acceleration/deceleration times, braking mode, and PID control settings. If using UniSoft, connect the drive to a PC and configure it through the software interface.
This answer is automatically generated