Table of Contents
Advertisement
accessories
Accessories
Control Techniques offers a number of products, which add
power, flexibility and value to the Unimotor range:
Cable Assemblies and
Connectors
Control Techniques' cable assemblies
simplify motor connection and reduce
installation time. Made to order in lengths
up to 100 metres, they have a PUR sheath
for high resistance to oil, grease and
solvents and have an excellent dynamic
performance. CSA and UL approved.
Accessories also available from your local
Control Techniques Drive Centre
Planetary Gearmotors
Gearmotors deliver greater torque
output whilst maintaining high standards
of precision and reliability. They may be
mounted in any orientation and are
available with single or double stage
gearbox options.
Fan Cowlings
Fan cowlings force cool air through
the fins on the Unimotor housing to
increase torque output by up to 70%.
Available to fit all motor frame sizes, the
units may be retrofitted and maximise
power density in tight spaces.
For further information on planetary gearmotors and fan
cowlings please contact your local Drive Centre
34
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Unidrive Servo Series and is the answer not in the manual?
Questions and answers
Need to input parameters into a UNI2402 Unidrive for a Rover 346
Need to input parameters into a UNI2402 Unidrive for a Rover 346 To clarify, it is a Biesse Rover 346... a c&c Machine Thanks
The parameters for a Control Techniques UNI2402 Unidrive Servo can be input using the on-board keypad, a remote keypad, or through UniSoft, a Windows-based configuration software tool. The drive has logically organized menus where parameters can be set.
To input parameters:
1. Use the keypad to navigate through the menus.
2. Select the required function from the logically organized menus.
3. Adjust the parameter values as needed.
4. Save the changes to apply the new settings.
For a Rover 346, specific motor and operational parameters should be set according to the motor’s requirements, such as speed limits, acceleration/deceleration times, braking mode, and PID control settings. If using UniSoft, connect the drive to a PC and configure it through the software interface.
This answer is automatically generated