Do you have a question about the Unidrive Servo Series and is the answer not in the manual?
Questions and answers
Patrick Cawley
March 25, 2025
Need to input parameters into a UNI2402 Unidrive for a Rover 346
2 comments:
Patrick Cawley
March 25, 2025
Need to input parameters into a UNI2402 Unidrive for a Rover 346
To clarify, it is a Biesse Rover 346... a c&c Machine
Thanks
Mr. Anderson
March 25, 2025
The parameters for a Control Techniques UNI2402 Unidrive Servo can be input using the on-board keypad, a remote keypad, or through UniSoft, a Windows-based configuration software tool. The drive has logically organized menus where parameters can be set.
To input parameters: 1. Use the keypad to navigate through the menus. 2. Select the required function from the logically organized menus. 3. Adjust the parameter values as needed. 4. Save the changes to apply the new settings.
For a Rover 346, specific motor and operational parameters should be set according to the motor’s requirements, such as speed limits, acceleration/deceleration times, braking mode, and PID control settings. If using UniSoft, connect the drive to a PC and configure it through the software interface.
This answer is automatically generated
Subscribe to Our Youtube Channel
Related Manuals for Control Techniques Unidrive Servo Series
Need help?
Do you have a question about the Unidrive Servo Series and is the answer not in the manual?
Questions and answers
Need to input parameters into a UNI2402 Unidrive for a Rover 346
Need to input parameters into a UNI2402 Unidrive for a Rover 346 To clarify, it is a Biesse Rover 346... a c&c Machine Thanks
The parameters for a Control Techniques UNI2402 Unidrive Servo can be input using the on-board keypad, a remote keypad, or through UniSoft, a Windows-based configuration software tool. The drive has logically organized menus where parameters can be set.
To input parameters:
1. Use the keypad to navigate through the menus.
2. Select the required function from the logically organized menus.
3. Adjust the parameter values as needed.
4. Save the changes to apply the new settings.
For a Rover 346, specific motor and operational parameters should be set according to the motor’s requirements, such as speed limits, acceleration/deceleration times, braking mode, and PID control settings. If using UniSoft, connect the drive to a PC and configure it through the software interface.
This answer is automatically generated