Table of Contents
Advertisement
No. 2D730-148E*O
3.26
Cleaning the MO Drive
When dust or foreign matter in the air adheres to the lens actuator of the MO drive, the
performance
of the MO drive may be degraded.
Clean the lens actuator periodically using the lens
cleaner specified below.
Note: Use the dedicated lens cleaner specified below.
Product name
Fujitsu product number
Product number for ordering
Lens cleaner
0240470
CA90002-C980
Open the shutter of the lens cleaner before use and check the condition of the brushes. When the
bristles of the brush have spread, the lens cleaner cannot remove stains or dirt from the lens
completely.
In such cases, replace the lens cleaner.
Clean the MO drive using the lens cleaner as outlined below. The cleaning procedure takes
approximately
15 seconds.
(1)
Start up the system.
(2)
Insert the lens cleaner. The lens cleaner is automatically
loaded.
Once the lens cleaner is
loaded, the positioner moves forward and backward and the lens is cleaned by the cleaning
brush of the lens cleaner.
(3)
After cleaning, the lens cleaner is automatically
ejected
3-82
Advertisement
Table of Contents
