Table of Contents
Advertisement
No. 2D730-148E*O
13.
NETWORK CONNECTION
13.1
Changing the PC Name
If it is necessary to change the PC name for compatibility with the network environment,
the
database must be deleted and then created again.
(1)
Connect the network cable to the corresponding
connector at the back of the system and
turn ON the power supply to start the system. After starting the system, display the service
menu.
Input the command "stopzjs"
on Utilities Command
Line and click Go to stop the
system software.
The service screen also disappears.
(2)
Select the Start button + Program + Accessory + Command
prompt and then execute the
"tus-rmdb.js"
command to delete the database.
After performing deletion, confirm that the database is deleted completely by following the
procedures
below.
l
Right-click the Start button and select Explorer from the menu.
Confirm that no file or
folder exist in the directories "D:\database"
and "E:\lmage".
l
If any file or folder exist in the directory "D:\database",
select all with the Ctrl + A keys to
delete them.
Perform the same procedures for the directory "E:\lmage".
13-1
Advertisement
Table of Contents
