Table of Contents
Advertisement
No. 2D730-148E*O
(8)
Removing the handle covers
(a)
Remove the four M4 screws <I> and the M4 screw <J> to remove the peripheral unit
rack retainer.
(b)
Remove the four M4 screws <K> to remove the handle cover (A).
(c)
Remove the four M4 screws CL> to remove the handle cover (B).
(9)
Removing the handle
Remove the two M6 screws CM> and loosen the two M4 screws cN> to remove the handle.
(10)
Removing the top cover
Remove the two M4 screws CO=- to remove the top cover.
(11)
Removing the top-left side cover
Remove the M4 screws cP> and cQ> (1 each) to remove the top-left side cover.
(12)
Removing the top-right side cover
Remove the top-right side cover in the same manner as the top-left side cover.
(13)
Removing the cover for the peripheral units
Remove the M4 screws CR> and cS> (2 each) to remove the cover for the peripheral units.
(14)
Removing the sliding cover
Remove the two M4 screws CT> to remove the sliding cover.
3-8
Advertisement
Table of Contents
