Table of Contents
Advertisement
No. 2D730-148E*O
(11)
Removing the near/away slide wire (at the support unit side)
(a)
Remove the screw CA> (M3) and remove the clamp.
(b)
Loosen the screw cB> and rotate the wire retaining bracket to remove the tip of
the wire.
(c)
Loosen the nut and rotate the adjuster to remove the wire from the support unit.
Screw CA>
(SBPP3-1 OSCR)
\
wire retaining bracket
3-78
Advertisement
Table of Contents
