Table of Contents
Advertisement
No. 2D730-148E*O
(4)
OSD adjustment
menu
(a)
Starting and terminating
the menu
Hold down the Test button on the bottom of the monitor and turn ON the breaker.
Press
the POWER switch to startup the system and then release the Test button. When the
Degaussing
button is pressed in this status, the adjustment
menu shown below is
displayed.
The menu can be closed by selecting "EXIT 0SD"from
MAIN MENU. The
menu can be displayed again by pressing the Degaussing
button again.
When setting is completed,
press the POWER switch of the system and then turn OFF
the breaker.
(b)
Operating the menu
The Degaussing
button and the + and - switches for contrast and brightness are used for
menu operation.
The selection cursor is moved by pressing the + and - switches, and submenus are
displayed by pressing the Degaussing
button
GEOMETRY
COLOR TEMPERATURE
ADVANCED CONTROLS
MONITOR STATUS
DEGAUSS
EXIT OSD
SERVICE MENU
a
Degaussing
button ON
VERTICAL POSITION
VERTICAL SIZE
q
SAVE & RETURN TO MAIN MENU
7-2
Advertisement
Table of Contents
