No. 2D730-148E*O
(3)
Application Preset editor
This editor is started up in the same manner as the Exam Type editor in (2). Refer to the
figure.
To edit an application
preset, select the desired application preset and also select the item
group such as 2D-Meas. etc. Then set the parameters.
Depending
on the application preset, some item groups are not displayed (for example, OB
Calc is displayed only when the OB application preset is selected).
[Save]
(located in the middle)
[Save]
(located at the bottom)
[Factory Setting]
(located at the second position
from the bottom)
[Factory Setting]
(located at the bottom)
Saves the parameters for each item group.
Saves all of the parameters for all item groups (in
particular, all of the parameters for the application
presets) at one time.
Returns the parameter settings to those at the time of
shipment.
Returns the parameter settings for all item groups to
those at the time of shipment.
11-13