Table of Contents
Advertisement
No. 2D730-148E*O
l
Other
Screen Size
: Used to change the image display size. (1, 2, 3)
1: 17 inches (full-size)
2: 16 inches
3: 15 inches (equivalent to the display size of the 17-inch CRT
monitor)
Border Intensity : Used to adjust the brightness of the borders (areas where no
image is displayed).
(0 (black) to 255 (white))
Menu Position
: Used to adjust the menu display position.
(Any position on the
screen)
Use the [+] or [-] switch to adjust the position.
The adjustment
direction (horizontal or vertical) can be selected
using the [A] switch.
Menu Off Timer : Used to adjust the time for which the menu is displayed
(5 s, 10 s, 25 s, 50 s)
Reset
: Used to reset all settings to the default values
0 Information
Information
(l/2):
Displays the currently selected input signal, resolution,
horizontal frequency, and vertical frequency.
Information
(2/2) : Displays the serial number, hours of use, and firmware version
of the LCD monitor.
0 Language
Language
: Used to select the language for menus.
Power save mode
1) Forced power save mode
Hold down both the [A] switch and the [-] switch for approximately
1 second to
forcibly set the monitor to power save mode (backlight off). To cancel power save
mode, hold down both the [A] switch and the [-] switch for approximately
3 seconds.
Forced power save mode remains set after the power switch on the operating panel
is turned OFF unless it is canceled as described above.
2) Automatic power save mode
The monitor is set to power save mode (backlight off) automatically when no signal is
input for 5 seconds or more.
7-10
Advertisement
Table of Contents
