Table of Contents
Advertisement
No. 2D730-148E*O
3.9
Removing the TI
Confirm that the transducers
have been removed.
(1)
Removing the right side cover
(a)
Remove the two rubber caps at the bottom of the cover.
(b)
Remove the two M4 screws <A> to remove the cover.
* The cover can be removed by pulling its bottom toward you.
(2)
Removing the TI
(a)
Remove the cable for the pencil transducer (PP) connected to the TI.
(b)
Loosen the two screws cB> to extract the TI.
cover
3-41
Advertisement
Table of Contents
