No. 2D730-148E*O
3.10
Removing the IO
(1)
Removing the right side cover
(a)
Remove the two rubber caps at the bottom of the cover.
(b)
Remove the two M4 screws <A> to remove the cover.
* The cover can be removed by pulling its bottom toward you.
(2)
Removing the IO
(a)
Remove all the cables connected to the IO
(b)
Loosen the two screws <B> to extract the IO.
Screw cB> (two)
(SBPP4-12SCR)
Right side cover
3-42