Table of Contents
Advertisement
No. 2D730-148E*O
(7)
Removing the blocks
Remove the four M4 bolts <I> to remove the two blocks supporting the shaft of the caster
unit.
(8)
Removing the caster units
(a)
Remove the eight M4 screws cJ>.
(b)
Remove the eight M8 screws cK> and remove the caster unit by sliding it toward the
front of the system.
* Remove the caster unit at the rear of the system using the same procedure.
(6B8-20SDM)
Screw cJ>
(SBPP4-IGSCR)
Block
I
1'
1.
Caster unit /
3-60
Advertisement
Table of Contents
