No. 2D730-148E*O
3.6. 12
Mounting the switch cover
(1)
Mount the cover (starting with the front section) by reversing the steps for removal.
Engage the tabs in the handle section with the indentations
in the cover cl> and then
mount the cover c2>.
(2)
Secure the four screws cB> while pressing the cover from above.
(3)
Secure the four screws <A> at right and left of the holder mounting base on the back of
the panel.
(4)
Install the four small rotary encoder knobs and the large rotary encoder knob.
Tabs