Table of Contents
Advertisement
No. 2D730-148E*O
3.7
Removing the PWB Rack
1 ACAUTION:
Two persons
are required
when removing
the PWB rack.
Confirm that the transducers
have been removed.
(1)
Removing the left side cover
(a)
Remove the two rubber caps at the bottom of the cover.
(b)
Remove the two M4 screws <A> to remove the cover
* The cover can be removed by pulling its bottom toward you
(2)
Removing the AC-DC metal retainer
(a)
Loosen the two M4 screws cB> to remove the AC-DC metal retainer.
AC-DC metal retainer
Left side cover
Screw <A> p'
(SBPP4-12SCR)
3-38
Advertisement
Table of Contents
