Table of Contents
Advertisement
No. 2D730-148E*O
(2)
Changing the imaging preset or application preset during an examination
To change the imaging preset or application preset after clicking the [Start] button on the
Patient Information screen, press the [Preset] switch on the touch panel, select the Imaging
Preset page or Application Preset page by pressing the corresponding
tab, and select the
desired preset.
l
When the imaging preset is changed
A dialog is displayed.
The application
preset and the transducer
are not affected by the
change of the imaging preset.
l
When the application preset is changed
No dialog is displayed.
The preset is changed directly.
The imaging preset and the transducer are not affected by the change of the application
preset.
* If previous patient information
is loaded on the Patient Information
screen and the Exam
Type is changed before the [Start] button is clicked, the imaging preset, application preset,
and transducer setting are changed together accordingly.
11-9
Advertisement
Table of Contents
