Adjusting The Lcd Monitor Arm Vertical Movement Resistance - Toshiba Aplio SSA-770A Service Manual

No. 2D730-148E*O
3.4.4 Adjusting the LCD monitor arm vertical movement resistance
(1) Remove the two caps and the two M3 screws <A> to remove arm cover I.
(2) Remove the two M3 screws <B> to remove arm cover 2.
Screw cB>
(PS3-8SCR)
- Arm cover 2
(3) Using the M6 hex key, rotate the hexagonal socket head bolt to adjust the vertical
movement resistance of the LCD monitor arm.
Increasing the LCD monitor
1
vertical movement resistance
Reducing the LCD monitor vertical
movement resistance
I
Id bolt
3-18