Proper Use; Proper Environment; Laser Class - MICRO-EPSILON optoControl 1200 Operating Instructions Manual

Laser Class

1.4
- The optoCONTROL series 120x measuring system is designed for use in industrial areas.
- It is used for measuring diameters, gaps, edges and light quantity
- The measuring system may only be operated within the limits specified in the technical data, see Chap.
3.3.
- Use the system only in such a way that in case of malfunctions or failure personnel or machinery are not
endangered.
- Take additional precautions for safety and damage prevention for safety-related applications.
1.5
- Protection class sensor:
- Operating temperature:
- Storage temperature:
- Humidity:
- Pressure:
2.
The optoCONTROL 120x sensors operate with a semiconductor laser with a wavelength of 670 nm (visible/
red) with a maximum optical output of ≤ 0.39 mW. The sensors are classified in Laser Class 1 (Class I). The
accessible radiation is harmless under predictable conditions.
The following warning labels are attached to the cover of the sensor housing:
IEC label
optoCONTROL 1200/1201

Proper Use

Proper Environment

IP 67 (Only with connected supply/output cable)
The degree of protection does not apply for optical inputs as their pollution
causes damage or failure of the function.
The protection class is limited to water (no penetrating liquids or similar).
0 to +50 °C (+32 to +122 °F)
-20 to +70 °C (-4 to +158 °F)
5 - 90 % (non-condensing)
Atmospheric pressure
Laser Class
Class 1 Laser Product
IEC 60825-1: 2008-05
Only for USA
Page 35