Proper Environment - MICRO-EPSILON surfaceCONTROL 3D SC3200 Assembly Instructions Manual

3.

Proper Environment

- Protection class
ƒ Sensor:
Optical paths during operation are excluded from the protection class.
Contamination of the paths causes impairment or failure of the function.
The IP67 protection class is a specification that is limited to protection from dust and
water. Oil, steam and emulsion effects are not included in this protection class and
must be evaluated separately.
- Temperature range
ƒ Operation:
ƒ Storage:
- Humidity:
- Ambient pressure: Atmospheric pressure
1) Max. permissible operating temperature depends on installation scenario, thermal
connection and operating mode. If necessary, external heat dissipation must be used to
ensure that the sensor's internal temperature of 60 °C is not exceeded.
4. Delivery surfaceCONTROL 3D 32xx
- 1 Sensor surfaceCONTROL 3D 32xx
- 1 Assembly instructions
- 1 Calibration final inspection
- 3 Protective caps
- 1 ECR3000-5 supply cable 5 m
- 1 SCR3000X-5 Ethernet interface cable 5 m
Carefully remove the components of the measuring system from the packaging
and ensure that the goods are forwarded in such a way that no damage can occur.
Check the delivery for completeness and shipping damage immediately after
unpacking.
If there is damage or parts are missing, immediately contact the manufacturer or
supplier.
surfaceCONTROL 3D 32xx
IP67 (only applies in the case of connected output connectors
and/or installed protective caps)
1
0 ... +45 °C (+32 ... +113 °F)
-20 ... +70 °C (-4 ... +158 °F)
20 ... 80 % (non condensing)
Page 2