Notes On Ce Identification - MICRO-EPSILON optoControl 1200 Operating Instructions Manual

Safety
Avoid permanent accumulation of dust or splashed water on the measurement system. Blow off or use pro-
tective housing.
> Damage to light source and receiver
Avoid damage (scratches) to the protective windows of the light source and receiver by using proper clean-
ing methods or cleaning solvents.
> Inaccurate, false measurements
Do not touch the protective windows of the light source and receiver with the fingers. Wipe off any fingerprints
immediately.
> Inaccurate, false measurements
1.3
The following applies to optoCONTROL 120x system:
- EU directive 2014/30/EU
- EU directive 2011/65/EU, "RoHS" category 9
Products which carry the CE mark satisfy the requirements of the quoted EU directives and the European
standards (EN) listed therein. The EC declaration of conformity is kept available according to EC regulation,
article 10 by the authorities responsible at
MICRO-EPSILON Eltrotec GmbH
Manfred-Wörner-Straße 101
73037 Göppingen / Germany
The measuring system is designed for use in industry and satisfies the requirements.
optoCONTROL 1200/1201

Notes on CE Identification

Page 34