MICRO-EPSILON optoControl 1200 Operating Instructions Manual page 56

Decommissioning, Disposal
10.
Incorrect disposal may cause harm to the environment.
11.
Accessories
PC1200-x
PC1200/90-5
PS2020
DD241PC(11)-U
IF1032/ETH
JU1200-HT
JU1200-HR
JU1200-VT
JU1200-VR
optoCONTROL 1200/1201
Decommissioning, Disposal
Disconnect the power supply and output cable on the light source and receiver.
Dispose of the device, its components and accessories, as well as the packaging materials in compli-
ance with the applicable country-specific waste treatment and disposal regulations of the region of use.
Appendix
Supply and output cable, 5 m lang, cable length x = 5 or 10 m, with female connector
and stranded wire
Supply and output cable, 5 m lang, with right angle female connector and stranded wire
Power supply (Mounting on DIN-rail), output 24 VDC, input 240 VAC, switchable for
110 VAC
Digital display unit RS232, connection for 1 analog sensor 0 - 10 V, 2 limit switch
ME Ethernet/EtherCAT interface module max.14 Bit/4 k samples/sec
Adjustment plate ODC 12xx for horizontal mounting of light source
Adjustment plate ODC 12xx for horizontal mounting of receiver
Adjustment plate ODC 12xx for vertical mounting of light source
Adjustment plate ODC 12xx for vertical mounting of receiver
Page 56