Ambient Climatic And Mechanical Conditions; Transport And Storage Conditions - Siemens SINUMERIK 840D sl OP 010 Manual

Operator panel front

Table of Contents

General information and networking

1.2 Application planning

● If signal lines cannot be routed a sufficient distance away from other cables, they must be

installed in grounded cable ducts (metal).

● The operator panel fronts, MCPs, MPPs, and full keyboards must be installed in metallically

enclosed EMC-compatible housings.

Note

For further information on interference suppression measures and the connection of

shielded cables, please refer to the EMC Installation Guide.

EMC limit values in South Korea

The EMC limit values to be complied with for South Korea correspond to the limit values of the

EMC product standard for variable-speed electric drives EN 61800-3, Category C2, or limit

value class A, Group 1 according to EN 55011. By applying suitable supplementary measures,

the limit values according to Category C2 or according to limit value class A, Group 1, are

maintained. Further, additional measures may be required, for instance, using an additional

radio interference suppression filter (EMC filter).

The measures for EMC-compliant design of the system are described in detail in this manual

respectively in the Installation Guideline EMC.

Please note that the final statement on compliance with the standard is given by the respective

label attached to the individual unit.

1.2.2

Ambient climatic and mechanical conditions

1.2.2.1

The components of the SINUMERIK 840D sl system exceed the requirements according to

EN 61800‑2 with regard to shipping and storage conditions.

The following data applies under the following conditions:

● Long-term storage in the transport and product packaging:

At weather-protected locations that have continuous contact with outside air through

openings.

● Transport in the transport packaging:

– In unventilated containers under conditions not protected from weather effects.

– In the "cold" in accordance with outside air.

– Air transport in the air-conditioned cargo hold.

Operator panel front: OP 010

Manual, 07/2018, A5E36371538B

Table of Contents