Tüv Certificate; Notes About Usage - Siemens SIMATIC KP8 Operating Instructions Manual

2.3 TÜV certificate
The HMI device is certified according to the following standards. The latest edition of the
standard can be found in the report for the Technical Inspectorate Certificate.
Safety subject
Functional safety
Basic safety
Machine Safety
You can obtain a copy of certificates and reports from the Technical Inspectorate at the
following address:
Siemens Aktiengesellschaft
Industry Sector
I IA AS RD ST
P.O. Box 1963
D-92209 Amberg
You can find the certificates from the Technical Inspectorate in the Internet at the following
address:
"Technical Support (http://support.automation.siemens.com/WW/view/en/4000024)"
2.4

Notes about Usage

The HMI device is designed for industrial use, limit class A. The following standards are met:
● Requirements for emissions EN 61000-6-4:2007
● Requirements for interference immunity DIN EN 61000-6-2:2005
If the HMI device is used in a residential area, you must take measures to achieve Limit
Class B conforming to EN 55016 for RF interference.
Suitable measures to achieve Limit Class B for suppression of radio interference include:
● Installation of the HMI device in a grounded control cabinet
● Use of filters in electrical supply lines
Individual acceptance is required.
KP8, KP8F
Operating Instructions, 10/2010, A5E03284305-01
Note
The HMI device is not suitable for operation in residential areas: Operation of an HMI
device in residential areas can have a negative impact on radio and TV reception.
Standard
IEC 61508:2010
IEC 13849:2006
IEC 61131-2:2007
EN 60204-1:2007
NFPA 79:2007
IEC 62061:2005
IEC 61511:2003
ISO 13850:2006
Safety instructions and approvals
2.3 TÜV certificate
23