meteocontrol Power Control Operating Manual page 23

Input field
Analogy input status
Sensor interruption with
less than
Overcurrent with more than
Analogue output status
Save
meteocontrol Power Control 03082012 - en
Meaning
Display of current input current or error status
When falling below the sensor break threshold,
a sensor fault is reported. When exceeding the
overcurrent threshold, a sensor fault is
reported.
Lower threshold of the input current for the
identification of a sensor break. Pre-setting
3.75 mA
Upper threshold of the input current for the
identification of overcurrent. Pre-setting 20.25
mA
Display of current output current and status
Saves the settings made
23/78