Technical Requirements; Eeg (German Renewable Energy Law); Meteocontrol Power Control Requirements - meteocontrol Power Control Operating Manual

Table of Contents

Advertisement

3.

Technical requirements

3.1

EEG (German Renewable Energy Law)

The necessity of active participation of operators of PV systems in the grid
safety management increases with the rising share in the overall power
production. This requires an option to reduce the feed-in power and
participation in the compensation of the reactive power in the grid.
As such, the plant operators must fulfil the following requirements:
They must be able to reduce the feed-in capacities of plants by remote
control or disconnect plants from the grid entirely.
They must be able to reduce the reactive power in the grid by reactive
power compensation.
3.2

meteocontrol Power Control requirements

It is recommended to clarify the following requirements of the energy
supplier, inverter manufacturer and plant operator for the Power Control
already in the phase of plant planning:
Power procedures according to which the requirements of the energy
supplier are implemented in control values for the inverters.
Power procedures that are supported by WEB`log PRO for the inverter
types used (inverter drivers).
Characteristic requirements for the power procedure made by the system
operator:
Note:
meteocontrol Power Control 03082012 - en
If difficulties regarding the requirement areas arise or
necessary configuration options are not available, consult
your sales contact at meteocontrol.
11/78

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Power Control and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents