Parameter Lists - Danfoss VLT Programming Manual

Parameter Lists

5 Parameter Lists
5.1 Parameter Options
5.1.1 Default settings
Changes during operation:
"TRUE" means that the parameter can be changed while the frequency converter is in operation and "FALSE" means that the
frequency converter must be stopped before a change can be made.
4-Set-up:
'All set-up': the parameter can be set individually in each of the four set-ups, i. e. one single parameter can have four different
data values.
'1 set-up': data value will be the same in all set-ups.
SR:
Size related
N/A:
No default value available.
Conversion index:
This number refers to a conversion figure used when writing or reading by means of a frequency converter.
Conv. 100 75 74
index
Conv. 1 3600000 3600
factor
Data type Description
2 Integer 8
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Visible String
33 Normalized value 2 bytes
35 Bit sequence of 16 boolean variables
54 Time difference w/o date
®
VLT HVAC Drive Programming Guide
70 67 6 5 4
60 1/60 100000 10000 10000 1000
0 0
®
MG.11.CB.02 - VLT is a registered Danfoss trademark
3 2 1 0 -1 -2
100 10 1 0.1 0.01 0.001 0.000
-3 -4 -5 -6
0.00001 0.00000
1 1
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
TimD
197
5 5