Dryer Drive Belt; Removing The Dryer Drive Belt - Kodak M6B Service Manual

Dryer Drive Belt

Removing the Dryer Drive Belt

[1] Disconnect the main power.
[2] Loosen the LOCK NUT on the ADJUSTING SCREW.
[3] Loosen the LOCKING PIVOT SCREW.
[4] Rotate the ADJUSTING SCREW to remove the tension from the DRYER DRIVE BELT.
[5] Remove the AIR TUBES.
[6] Remove the ROLLER ASSEMBLIES.
[7] Remove the DRYER DRIVE BELT.
[8] Reverse the procedure to install the parts.
[9] Check the DRYER DRIVE BELT adjustment by doing the adjustment procedure on page 2-31.
AIR
TUBE
2-30
Moving parts.
BELT
LOCKING
SCREW
ADJUSTING
SCREW LOCKNUT
ROLLER
ASSEMBLY
Figure 35 Removing the Dryer Drive Belt
ADJUSTING
SCREW KNOB
H048_0093BCA
H048_0093BA
246628