Turnaround Assembly; Disassembling The Turnaround Assembly - Kodak M6B Service Manual

Turnaround Assembly

Disassembling the Turnaround Assembly

Figure 15 shows a WASH RACK; however, the procedure is the same for the disassembly of all
RACKS.
[1] Remove: See Figures 15 and 16.
• EXIT GUIDE SHOE and the BRACKETS
• The ROLLER above the GUIDE SHOE
• 2 SPRINGS and LOCKING PLATE from the TURNAROUND
• Both ''A'' ROLLERS.
[2] From the non-drive side, pull the SHAFT from the ''B'' ROLLER.
[3] Remove the CHAIN from the ''B'' ROLLER.
[4] Remove the 4 HOLDING SCREWS.
[5] Remove the TURNAROUND ASSEMBLY.
SIDE
PLATE
SPRING
Non-Drive
Side
2-12
NOTE
EXIT
GUIDE
SHOE
Figure 15 Disassembling the Rack Assembly
GEAR
SPRING
Drive Side
HOLDING
SCREW (4)
TURNAROUND
ASSEMBLY
H048_0053DCA
SIDE
PLATE
H048_0053DA
246628