Roller Support; Removing A Roller Support - Kodak M6B Service Manual

Roller Support

Removing a Roller Support

[1] Disconnect the main power.
[2] Remove the necessary AIR TUBES and ROLLER ASSEMBLIES.
[3] Rotate the SUPPORT as you pull it from the SIDE PLATE.
[4] To remove a broken SUPPORT, use a PUNCH to drive it out.
[5] DRIVE-SIDE SUPPORTS: Install the SUPPORTS with the openings toward the BELT and facing each
other.
[6] NON-DRIVE SIDE SUPPORTS: Install the SUPPORT with the opening toward the top of the processor.
2-32
Moving parts.
NEW STYLE
OLD STYLE
Non-Drive
Side Support
Figure 37 Removing a Roller Support
Drive Side
Support
SIDE
PLATE
H048_0030ECB
H048_0030EA
246628