Danfoss VLT Micro Drive FC 51 Programming Manual page 32

Parameter Descriptions ®
VLT Micro Drive FC 51 Programming Guide
5-55 Terminal 33 Low Frequency
Range: Function:
20 Hz * [20-4999 Hz] Enter low frequency corresponding to low
motor shaft speed (i.e. low reference
value) in 5-57 Terminal 33 Low Ref./Feedb.
Value.
5-56 Terminal 33 High Frequency
Range: Function:
5000 Hz [21-5000 Hz] Enter high frequency corresponding to
*
high motor shaft speed (i.e. high
reference value) in 5-58 Terminal 33
High Ref./Feedb. Value.
5-57 Terminal 33 Low Ref./Feedb. Value
Range: Function:
0.000 [-4999-4999] Set reference/feedback value
*
corresponding to low pulse frequency
value set in 5-55 Terminal 33 Low
Frequency.
5-58 Terminal 33 High Ref./Feedb. Value
Range: Function:
50.000 [-4999-4999] Set reference/feedback value
*
corresponding to high pulse frequency
value set in 5-56 Terminal 33 High
Frequency.
®
MG02C602 - VLT is a registered Danfoss trademark
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-12769-Danfoss-132F0026-VFD-Micro-Drive-440V-5HP.aspx
4 4
31