Manager's Menu - Taylor C723 Operator's Manual

Manager's Menu

The Manager's Menu is used to enter the operator
function displays. To access the Menu, touch the
center of the CONE symbol
on the right side of the machine. The arrow symbols,
the SEL symbol, and the CONE symbol
when the ACCESS CODE screen is displayed.
(See Figure 17.)
Figure 17
In the Menu program, the arrow symbols and the
SEL symbol will function as menu keys.
UP ARROW - increases the value above the cursor
and is used to scroll upward in text displays.
DOWN ARROW - decreases the value above the
cursor and is used to scroll downward in text
displays.
SEL - advances the cursor position to the right and
is used to select menu options.
Note: The machine will continue operation in the
mode it was in when the menu was selected.
However, the control keys will not be lit and are
non-functional when the Manager's Menu is
displayed.
Model C723
on the control panel
will be lit
21
Entering Access Code
With the ACCESS CODE screen on the display, use
the SEL symbol to set the first code number in the
cursor position. When the correct number is
selected, touch the SEL symbol to move the cursor
to the next number position. (See Figure 18.)
ENTER ACCESS CODE
8 3
__
Figure 18
Continue to enter the proper access code numbers
(8309) until all four numbers are displayed, and then
touch the SEL symbol. The Manager's menu list will
display on the screen, provided the correct access
code is entered.
If an incorrect number is entered for the access
code, the display will exit the Menu program when
the SEL symbol is selected.
Menu Options
Touch the ARROW symbols to move up or down
through the Menu. Select a Menu option by touching
the SEL symbol. Exit the Menu program by selecting
EXIT FROM MENU or touch the CONE symbol
The following menu options are listed in the
Manager's Menu.
EXIT FROM MENU
SERVINGS COUNTER
SET CLOCK
AUTO START TIME
STANDBY MODE
MIX LEVEL AUDIBLE
FAULT DESCRIPTION
FAULT HISTORY
LOCKOUT HISTORY
SYSTEM INFORMATION
CURRENT CONDITIONS
NET SERVICE PIN
Selecting "EXIT FROM MENU" will exit the
Manager's Menu and then return the control panel
symbols to normal operation.
Important: To the Operator
0 9
.
130425