Taylor C723 Operator's Manual page 26

The SERVINGS COUNTER screen is used to reset
the servings counter to zero. (Note: The SERVINGS
COUNTER automatically resets to zero when the
machine is brush cleaned.) (See Figure 19.)
SERVINGS COUNTER
0 0
> Next
Figure 19
Reset the SERVINGS COUNTER by selecting the
SEL symbol to advance to the next screen. Select
the UP arrow symbol to move the arrow (>) to YES
and touch the SEL symbol. The servings counter will
reset to zero and exit back to the Manager's Menu.
(See Figure 20.)
Reset Counters
ARE YOU SURE?
Yes
> No
Figure 20
The SET CLOCK option allows the Manager to
adjust the control clock date and time. The date and
time may only be changed after the freezer has
been manually cleaned, but before it has been
placed in the AUTO or STANDBY mode. The
following message will be displayed if the SET
CLOCK option is selected when the machine is not
in a brush clean state. (See Figure 21.)
SET CLOCK
12:01 2/10/2011
NO CHANGES ALLOWED
Press Any Key
Figure 21
Important: To the Operator
0
To change the date or time, select the SET CLOCK
option in the menu. Touch the UP arrow symbol to
advance the arrow from "Exit" to "Change", and then
touch the SEL symbol to select the Change option.
(See Figure 22.)
SET CLOCK
12:01 2/10/2011
Change
> Exit
Change the time by touching the UP arrow with the
cursor under the hour position. Move the cursor to
the minutes position by touching the SEL symbol.
Once the correct minutes are entered, touch the
SEL symbol to advance the cursor to the month.
(See Figure 23.)
SET CLOCK
12:01 2/10/2011
> Exit
Enter the correct month, day, and year. After they
have been entered, touch the SEL symbol to
advance to the DAYLIGHT SAVING TIME (DST)
screen. (See Figure 24.)
DAYLIGHT SAVING TIME
> Enable
Disable
Pressing the UP or DOWN arrow symbols will move
the arrow to "Enable" or "Disable". Pressing the SEL
symbol next to "Disable" selects that option and
returns to the Manager Menu. Pressing the SEL
symbol next to "Enable" selects that option and
displays the second screen. (See Figure 25.)
MAR Second Sunday
NOV First Sunday
Change
> Exit
22
Figure 22
Figure 23
ENABLED
Figure 24
Figure 25
Model C723