Taylor C723 Operator's Manual page 34

Step 16
Slide the three o-rings into the grooves of each
standard draw valve. Slide the H-ring and o-ring into
the grooves of the center draw valve. Lubricate the
H-ring and o-rings.
Figure 52
Step 17
Lubricate the inside of the freezer door spouts, top
and bottom.
Figure 53
140519
Operating Procedures
Step 18
Insert the draw valves from the bottom until the slot
in the draw valves come into view.
Step 19
Slide the fork of the draw handles in the slot of the
draw valves, starting from the right.
30
Figure 54
Figure 55
Model C723