Manager's Menu - Taylor 0738 Operator's Manual

Soft Lock
When a Heat Treatment Cycle has not been
initiated within the last 24 hours, a soft lock failure
will occur. A soft lock allows the operator to
correct the cause of the soft lock. The operator
has the option of either starting another Heat
cycle or brush-clean the machine. When a soft
lock occurs, the machine will go into Standby
mode. The message FREEZER LOCKED - HEAT
TREAT REQUIRED is displayed on the screen.
The reason for soft lock is indicated in the Lockout
History in the Manager's Menu (SEL button).
When the reason for the soft lock has been
corrected, selecting Heat Cycle button initiates
a Heat cycle immediately.
A soft lock can also occur any time during
operation when the hopper or barrel temperature
rises above 59°F (15°C), the temperature rises
and remains above 45°F (7°C) for more than 1
hour, or the temperature rises and remains above
41°F (5°C) for more than 4 hours.
If a product over temperature condition occurs
during operation, the message FREEZER
LOCKED - HEAT TREAT. REQUIRED is
displayed on the screen.
When one of these messages appears, automatic
freezer operation cannot take place until the
freezer is disassembled and brush-cleaned, or
has completed a Heat Treatment Cycle.
Note: A record of Heat Cycle Data and Lockout
History can be found in the Manager's Menu (SEL
button).

Manager's Menu

The Manager's Menu is used to enter the
operator function displays. To access the
Menu, press the SEL button.
In the Menu program, the Arrow buttons, the OK
button, and the C button will function as menu
buttons.
•
Up Arrow—increases the value above the
cursor and is used to scroll upward in text
displays.
User Interface
•
Down Arrow—decreases the value above the
cursor and is used to scroll downward in text
displays.
•
OK—Confirms the selected value.
•
C—Deletes the selected value.
There is a 1-minute time-out in effect during the
Manager's Menu. While in the Manager's Menu,
if no activity occurs within a 1-minute period, the
display will exit to the main screen.
Note: The machine will continue operation in the
mode it was in when the Menu was selected.
However, the control buttons will not be lit and are
non-functional when the Manager's Menu is
displayed.
Model 0738
USER INTERFACE
5-5
5