Taylor C723 Operator's Manual page 35

Step 20
Slide the pivot pin through each draw handle as they
are inserted into the draw valves.
Figure 56
Note: This freezer features three adjustable draw
handles to provide portion control, giving a better
consistent quality to your product and controlling
costs. The draw handle should be adjusted to
provide a flow rate of 5 to 7-1/2 oz. (142 g. to
213 g.) of product by weight per 10 seconds.
To INCREASE the flow rate, turn the adjustment
screw CLOCKWISE. Turn the adjustment screw
COUNTER-CLOCKWISE to DECREASE the flow
rate.
Step 21
Snap the design caps over the bottom of the door
spouts.
Figure 57
Model C723
Step 22
Slide the drip pan into the hole in the front panel.
Step 23
Install the front drip tray and splash shield under the
door spouts.
Step 24
Slide two o-rings on one end of the feed tube. Slide
two o-rings on the other end of the feed tube.
31
Figure 58
Figure 59
Figure 60
130425
Operating Procedures