Comparison Of Drive-Cliq Signal Cables - Siemens SINAMICS S120 Manual

Cabinet design and EMC for components, Blocksize format
10.6 Connection Methods
Extension
The pre-assembled extension of a basic cable has an M12 plug (IP67) and an M12 socket
(IP67).
Figure 10-5
Note
Maximum number of extensions
A maximum of two extensions can be used. More than two extensions can result in data
transfer errors.
Note
Maximum permissible total cable length
The maximum permissible total cable length between the measuring system and the DRIVE-
CLiQ socket of the SINAMICS S120 device is 30 m. For a longer total cable length, data
transfer errors may occur. This is the reason that no additional extension can be connected
to a 30 m long basic cable.
Note
DRIVE-CLiQ cabinet bushing with M12 plug
For information about the cabinet bushing, see DRIVE-CLiQ cabinet bushings (Page 335).
10.6.1.5

Comparison of DRIVE-CLiQ signal cables

DRIVE-CLiQ signal cables are designed for various applications. The following table
provides an overview of the most important properties.
Table 10- 8 Properties of DRIVE-CLiQ signal cables
DRIVE-CLiQ signal cable
Approvals
cURus or UR/CSA
1)
In conformance with RoHS
364
DRIVE-CLiQ extension with M12 plug and M12 socket
DRIVE-CLiQ
Yes
Yes
DRIVE-CLiQ
MOTION-CONNECT 500
Yes
Yes
Manual, (GH6), 07/2016, 6SL3097-4AL00-0BP5
DRIVE-CLiQ
MOTION-CONNECT 800PLUS
Yes
Yes
AC Drive