System Data; System Data For Pm240-2 Blocksize Power Modules - Siemens SINAMICS S120 Manual

System overview

2.5 System data

The following system components are available for SINAMICS S120 AC Drive:
● Line-side power components, such as fuses, contactors, reactors and line filters for
switching the power supply and complying with EMC regulations.
● Power Modules (either with or without integrated line filter) and an integrated braking
chopper to provide power to the connected motor
To address the required functions, SINAMICS S120 AC Drive is equipped with:
● Control Units that provide the drive and technological functions
● Additional system components to expand the functionality and to handle various
interfaces for encoders and process signals.
The SINAMICS S120 AC Drive components were developed for installation in cabinets.
They have the following features and characteristics:
● Easy to handle, simple installation and wiring
● Practical connection system, cable routing in accordance with EMC requirements
● Uniform design
2.5 System data
Unless explicitly specified otherwise, the following system data is valid for SINAMICS built-in
devices described in this manual.
When engineering the complete S120 drive, the system data of the associated Control Units,
supplementary system components, DC link components and sensor modules must be taken
into consideration.
2.5.1

System data for PM240-2 Blocksize Power Modules

Table 2- 1 Electrical data for the blocksize format
Line connection voltage
Devices FSA to FSC
Devices FSD to FSF
Line system types
Line frequency
34
1 AC: 200 ... 240 V ±10 %
3 AC: 200 ... 240 V ±10 %
3 AC: 380 ... 480 V ±10 %
3 AC: 200 ... 240 V ±10 % (in operation -20 % < 1 min)
3 AC: 380 ... 480 V ±10 % (in operation -20 % < 1 min)
3 AC: 500 ... 690 V ±10 % (in operation -20 % < 1 min)
Grounded TN/TT line systems and non-grounded IT line systems
47 ... 63 Hz
Manual, (GH6), 07/2016, 6SL3097-4AL00-0BP5
AC Drive