Connect the thermostatic switch to a Control Unit
Connect the thermostatic switch to a free digital input of the Control Unit. Set the function of
this digital input to the OFF2 command. If the braking resistor overheats, the Power Module
is disconnected from the power supply.
Figure 5-1
5.1.1.4
Dimension drawings
Figure 5-2
AC Drive
Manual, (GH6), 07/2016, 6SL3097-4AL00-0BP5
Connecting the thermostatic switch on the braking resistor to a Control Unit
Dimension drawing and drilling pattern for blocksize braking resistors
DC link components
5.1 Blocksize
159