7.4.2.14
S5 DIP switch
DIP switch S5 is used to switch the analog input between voltage input or current input. It is
located under the blanking cover (see CU310-2 PN Interface Overview (Page 224).)
Table 7- 36
DIP switch S5 - switchover between voltage/current
7.4.2.15
DIAG button
The DIAG pushbutton is reserved for service functions.
7.4.2.16
RESET button
Pressing the RESET button restarts the CU310-2 DP after expiry of a preset time. A data
backup is run at the same time. This means that all the settings are retained.
AC Drive
Manual, (GH6), 07/2016, 6SL3097-4AL00-0BP5
Control Units, Control Unit Adapters and operating components
Switch
Function
S5.0
Switchover between voltage (U) / current (I)
S5.1
Not assigned
7.4 Control Unit CU310-2 DP (PROFIBUS)
261