Assigning Parameters To The Pa Master (Parameter Overview - Fb M) - Siemens Simatic CFU Commissioning Manual

Commissioning
8.7 Commissioning (offline)
Procedure
1. Open HW Config.
2. In the index list, double-click the "DIQ" slot.
The "Properties - DIQ8..." dialog opens.
3. Make the system-specific settings.
Standard behavior (non-activated channel)
A channel that is not activated always behaves like a "digital input" without sensor supply.
8.7.3.3

Assigning parameters to the PA master (parameter overview - FB M)

80
Commissioning Manual, 07/2018, A5E39252870-AC
SIMATIC CFU