Siemens Simatic CFU Commissioning Manual page 53

You have the following options for configuring an IO:
● Configuring IO in HW Config (offline)
Insert PROFIBUS PA profiles via drag & drop from the catalog.
You can find information on this in section "Configuring a PROFIBUS PA field device
(offline) (Page 71)".
● Configuring IO in the "CFU ... Configuration" wizard (online)
Set PROFIBUS PA profiles in SIMATIC PDM using the commissioning wizard of the CFU.
You can find information on this in section "Parameter assignment of PROFIBUS PA field
device (online) (Page 86)".
Disabling fieldbus connections.
You can disable individual fieldbus connections in SIMATIC PDM using the commissioning
wizard of the CFU.
SIMATIC CFU
Commissioning Manual, 07/2018, A5E39252870-AC
8.2 Startup of field devices depending on the configuration
Commissioning
53